PetSafe Current Circulating Pet Fountain

Pump is not working or the water is not flowing as much as it used to.

• Never let the water in the bowl get below the minimum fill level. This can cause the pump to overheat and stop functioning. When refilling the bowl, make sure to add water before turning the fountain on.
• Lack of regular cleaning may result in the pump becoming clogged with pet hair and food debris. The pump must be cleaned every 2-4 weeks to ensure proper function.
• A video detailing how to properly clean the pump is available on our website at www.petsafe.net.
• Fill the fountain with water up to the max fill line.

Fountain is loud.

• A low humming noise is normal, but it should not be loud. Check the water level. If water level is too low then the pump will have to work harder causing it to be louder than normal.
• Unplug the fountain for 15 seconds. If the noise does not stop when plugged back in, it’s possible that some debris is caught on the impeller. Remove the pump and clean the impeller. Try rubbing a small amount of vegetable oil onto the magnetic pin with a q-tip to lubricate the impeller.

There are black particles in the bowl.

• This is loose granulated carbon dust from the filter and is completely harmless for your pet to drink. Rinse the filter in
  cold water before placing it in the fountain to prevent this.

The fountain feels slimy.

• If you have multiple pets or dogs using the fountain, the slimy feeling may be caused by your pet’s saliva. Change the water
  and clean your fountain more frequently to prevent this.
• Make sure the fountain parts are rinsed thoroughly after cleaning the fountain. Soap residue may cause the sliminess.

The adapter is warm to the touch.

• Unplug the fountain and plug it into a surge protector.

The fountain is leaking.

• Sometimes water around the fountain is caused by pets drinking. Some pets are prone to spilling. Watch your pet when he drinks to see if this is the cause. If it is, you can purchase a fountain mat or other water-resistant mat to place under the fountain.

The fountain seems dirty even after cleaning.

• If there is a white chalky substance in the fountain, your fountain may have a mineral deposit build-up from hard water. To remove these deposits, clean the fountain parts with a 80% water, 20% vinegar solution. Rinse all parts thoroughly afterwards. Use filtered or purified water instead of hard tap water to prevent this.